Sore Bum: Stool pillow top

A log stool is just a log if you don't spruce it up!

My log stool was hard and not that exciting until I added a pillow top to it!

Materials:

Stiff Fabric

Foam or Round Pillow

Long screw

Washer the bigger the better

Big Button

Strong glue

First determine how big to make the pillow. I made mine 1" wider than my stump so that it had some overhang. I had some old foam lying around so I cut that to the right size. I wanted the seat to be soft, so I cut an additional circle slightly smaller to go on top for extra padding. If you are using a pillow skip this step.

Making a pillow, I quickly learned, is a very simple task and does not require a pattern. Measure the diameter of the foam and add 3" total to the measurement to account for the 1.5" seam on each side. Fold your fabric in half and cut a circle out of your fabric with the new diameter. To cut a circle I tied a pencil on one end of a string and cut the sting to be the correct length. Hold the sting in the middle and draw a circle with the pencil all the way around keeping the sting tight. It was not 100% accurate for me, but it should be close enough that it will correct when you sew it together. 

Next measure the distance around the outside of the newly cut circles Add a few inches for 'safety' this will be the side panel. Measure the height of your foam/pillow. Mine was 6" tall but I wanted it to squish down inside my pillow case so I only cut 6" total (3" + 1.5" seams on each side). 

Fold the side panel stip in half, and in half again. Pin the corners (3 pins and 4 even sections). Next fold the one circle in half and pin the edges (do this both ways so there are 4 pins dividing the quarters). Match the pins so that the side panel stip is evenly dispursed around the circle. Make sure you do this right side to right side (so when you flip it inside out you see the good side of the fabric). 

Sew the circle on to the side panel strip. Do it again for the other circle but only sew 3/4 of the way around. 

Put the pillow or foam pieces inside and hand sew the opening closed. 

Take a long screw. Mine was 5" but that might have been over kill. Place the washer on the screw. This gives extra security so the fabric doesn't rip and pop over top of the screw. Place the pillow on the stump just how you want it. Find the middle of the pillow (I eyeballed it) and screw down through the pillow into the stup. Go down almost as far as you can so that when you sit down the screw doesn't poke you. Finally glue a big button on top of the screw to hide it.

Finished!

Rustic Cabin: Stool and side table

I don't know if its because I'm Canadian, British Columbian, or if its just me, but there is something fantastic about that deep in the woods Cabin. The kind where the owner says, my grandfather built this cabin and everything in it from the trees on the property. Then you cook the fish you just caught for dinner over a wood burning stove. That to me, sounds delightful!

I have a friend with a cabin like the one I am describing. Its near Egan Lake in BC, which is 1.5 hours to the closest town of under 2000 residents. Its really in the boonies! My friends dad built the entire house, and all the furniture inside. Its probably close to 500 sqft which is very squishy in -15 C  with 8 other people inside...But I love it so much! Unfortunately I can't find a good picture of that cabin, so I will have to update this post next time I go up there.

That being said I made some wooden stools that are very log cabin-esk.

Materials:

Large log stump

Skinny log stump

Sand paper (palm sander if available)

Large circular saw or chainsaw

spray varnish

3 Dowel Screw

What I did:

I started with two big log stumps and two skinny stumps from the pile in our back yard. You can get your from anywhere, I often see free fire wood on craigslist.

Brush off the sides with a coarse broom to get rid of any groseness and any loose bark. Then sand the top and bottom to remove any slime and to level out the surface.

Varnish all sides. I used spray varnish because it was much quicker and easier to get in the cracks. Trust me on this one, when I discovered varnish came in a spray can...my life was very simplified!

Next cut three even pieces from the smaller log. Keep in mind that a chair is about 19" tall. I wanted mine 21" for a bit of a higher stool so we cut the feet to be 3" tall.

Clean up and varnish the feet the same way as the main stool. Use the dowel screws to screw the legs into the side you choose to be on the bottom. Dowel screws are also revolutionary. If you have never used them before. Grip the middle with a pliers while you twist it into the foot. Only twist 1/3 of the way into the foot. Then flip it over and twist it into the stump using the foot as your handle. Once the stump side is tight the foot side will tighten up as well.

If you want a side table or a hard top stool thats it your done!

Pillow Tutorial coming soon...

Bridesmaid bouquets: Paper Flowers

I think, after a year break it is time to start posting about wedding crafts. Since crafting is my hobby anyhow, having a DIY wedding was not only the obvious choice, but was no extra work. I simply replaced my personal crafting time with my wedding crafts. These crafts were more redundant than previously, but I had a bit more motivation to work hard, so it balanced out in the end.

Materials:

Light colored Paper about 1 page/2 flowers (anything less heavy than cardstock, but more heavy than copy paper will do). I used cream

Dark colored Cardstock Paper (I actually used the paper kids make school projects on because it was the only navy paper I could find). The heavier the better

Floral Wire

Hot glue or white glue (I used both)

Scissors

Pliers (or just a pencil will do)

What I did:

I actually followed This tutorial on the Elli blog and made a few of my own variations. She called them roses, but I chose them because I thought they looked like poppies which is what I was going for. 

Cut out TONS of petals in the shape of the picture to the right.. Cut them free hand because you do not want them to all be the same. Vary width, height, and shape if you like. I folded my paper in half and cut two petals at one time. Cut three small slits in the bottom just like the black lines on the picture. Fold the sides over the middle and glue them in place (this is later referred to as the platform). The petal should start to form a curvichure when you do this. I used white glue for this so there was no bump. 

Once the glue on the petals has dried it is time to start to put them together. Start with 3 or 4 of your smaller petals. Arrange them in a circle and use white glue to glue the platforms together one on top of another. Use another 5-4 of your larger petals and glue their platforms underneath. Make sure to stager the petals when you arrange the outer ones so that they are between the inner petals. Continue adding petals staggered to the outside until you are pleased. I used about 6-10 petals/ flower depending on the shape and size.

Next cut 1.5" and 2.5" diameter circles out of the dark paper. Cut slits in the circles from the outside edge to the centre as thin as you can go (mine were about 2mm).  The slits should go 3/4 of the way to the centre. so there is a small uncut spot in the middle. Curl the slits around a pencil or chopstick so they resemble a small bowl. Finally glue the smaller one inside the bigger one. This will be the centre of your flower.

Twist the top of your floral wire 1-2 times around your pliers or pencil and fold that section over so that it creates a platform. Hot glue the flower petals onto the platform. Then use hot glue to place the centre piece inside the newly assembled flower. Finally cut a small cloud shape out of your lighter paper (the same as the petals). Poke a hole in the centre with the floral wire and slide it up the floral wire and hot glue it onto the very bottom to cover up the floral wire platform. 

Ta Da! Beautiful flowers that never wilt!

Wedding Crafts: Challenges of Blogging

I started this blog after I got engaged. I knew, that that time, that most of the crafts I planned to make, were going to be for my wedding.

Well it turned out to be true. I have been crafting a normal amount lately  if not more than normal, and I have not made any crafts that I want to blog about. The thing is, I want all the crafts at my wedding to be new and exciting. I don't want people to walk into my reception and whisper to their friend: "I know exactly how she made those flowers, dresses, necklaces...ect. Even though you might think they look impressive, its actually really easy." I want people to walk in and whisper to their friend: "WOW, thats so cool, where did she find such a cool object! Its so unique!"

Its tough to not blog about my crafts, let alone tell people about them. I would not say that my number one skill is with keeping secrets, when I get excited about something, I just want to tell people! I am so proud of so many of the crafts that I made so far but am really struggling to keep them a secrete.

The funny thing is that I knew this was going to happen as soon as I started the blog. Why couldn't I wait just 7 more months!? When I get excited, I cant hold it in! So I started, and started too early, and now have nothing to share.

In the end this blog post is about nothing really, just that I want to blog, but I cant. :(

Canadians: A Painting

Canadian's are not known for their patriotism, but we love things that are Canadian. We love outdoor gear like rain, snow, and other winter jackets. We love our landscape, like the mountains, the rivers, the lakes, and the Prairies. We love to hear how Americans stereotype us, and think we live in igloos, even though most of us have never even seen an igloo. We love outdoor adventures like hiking, biking, fishing, hunting out our back door, and others. We love our local animals, like Bears, Moose, Foxes, and Salmon (but not the Geese). And we LOVE hockey!

This was a project I did was about our local animals. Its a Black Bear! We are more known for our Grizzly Bears in this area, but they are much scarier, and not as common to see.

I chose to do a Black Bear because, for some random reason, I like to paint things for my younger brother. Its not that I don't like painting for my older brother, but his wife is 1 million times better, so it would be pointless. I told him I wanted to paint him something that I could paint a solid color, he wanted to be sure it was something manly, so we picked a Black Bear. It was fitting with the color of choice.

What I did:

It was a very easy craft! I looked up a few pictures of bears online so I could remember exactly what they looked like. I then covered a cheep dollar store canvas in news paper clippings. I cut out small pieces because I wanted it to be all words, and the news paper normally has a lot of pictures. You could also do this with book pages, but I was more willing to cut up my news paper than a perfectly good book.

I used a glue and water mixture to put the paper onto the canvas, then I sealed it on top with the glue and water. 

Lastly, I painted a picture of a Black Bear on top. If you are not good at painting, here is a cheater idea for this project. Print off a picture of a simple object(like the bear) in the right size. Then, cut out the picture slightly smaller than it is. Trace around the cut out onto the canvas, and paint inside. Since you cut is slightly smaller, it allows room to go out of the lines if there is a mistake. 

Finished!

Earrings: The Shiny Gold Shirt

My Brother is one of those guys who is so cool he can get away with anything. Right now, for instance, he has a greasy short pony tail, and bobby pins back his bangs, but he is still the coolest kid. He is the kinda person that sets trends, though I hope others are smart enough not to follow the pony tail trend. If he starts wearing baggy cargo pants, so do all the kids in his fan club. I really like him, he is a really nice, caring, hilarious, fun guy, but he can be a bit odd at times. Right now he is a folk singer song writer. His group is called Bronson and the Angels. However, he was not always a musician.

My Brother used to be really into basketball. He was super good and played for our provincial team! During that time, being the high school jock that he was, he was invincible in his coolness factor. I think he was in grade 9 or 10 when he went on a summer tournament to San Francisco. He wanted to make a statement at this tournament. He found the most intense gold shiny shirt at Value Village (thrift store), so he decided to wear it...everyday. This shirt made a statement for sure! It was probably a really nice shirt wear to the disco if you were over the age of 50 20 years ago. But, in the 21st century, it was not popular amongst high school boys.

I'm not sure if he still has the shirt tucked away in a safe keeping box somewhere, but I have not seen it in the last 5 years. However, when I was looking through my mom's button box, I came across two buttons from the shirt that had the same fabric on them. Though I would not wear the shirt now, I think the fabric is nice in small button sized quantities. So I decided to make them into earrings.

What I did:

This project probably took me less than 5 min. The buttons were shank style buttons, so they had a loop on the back. I took my pliers and cut the loop off so they would lie flat, this left a messy hole in the back, but that didn't matter. I then took some craft earring studs, and glued them onto the back of the button. I let the glue dry over night to be sure it was good and secure. I wore them the next day! Presto!

Wine Bottles: I love to Recycle

The Truth is, I like to Recycle. I'm not a recycle fanatic or anything, but I due value recycling.

I think my room mates have a different opinion about recycling than I do. I usually take the garbage and recycling out most weeks to be collected, and it can be a bit of a struggle. I'm not sure if they don't know, or if they just don't care, that the cardboard needs to be flattened, the jars need to be rinsed, the paper needs to come off, ect. But really I don't mind the extra 5 min to clean it all up. That's not really the hard part for me, the part that bothers me the most is what people DON'T recycle. When I take the garbage out and find plastic containers, to-go cup lids, paper, plastic bags, cardboard boxes, and so many other things that could be recycled in the garbage, that rubs me the wrong way. I usually pick out the things on the top of the garbage, but I don't really want to dig down into the garbage to pull everything out. Especially since we don't have a compost so there is rotting food in our garbage. I also am passionate about compost, but that's another story.

I would like to to be clear that I am not a nag when it comes to Recycling. At least not yet, or not with my current room mates. The odd time I will casually mention that certain things can be recycled, or that they need to be cleaned a specific way. However, this very rare since my room mates are not usually home when I take out the garbage and recycling.

The one thing I like more than recycling, is reusing or re-purposing, or (the new trendy word) up-cycling. I saw a craft on Pintrest, that was actually from Etsy, and decided to make it my own.

What I did:

I first spray painted the bottles with two coats of a special glass paint, so that my paint would not chip off later. I then made some chalk paint: 2 Tbs fine tile grout mixed with 1 cup craft paint. I wanted to be able to write what ever I wanted on the bottles, which is why I used chalk paint. The chances of me forgetting what type of flower I put in them is very high, this way I can write on the bottles and remember. 

After the chalk paint dried I twine wrapped the bottles. I wanted them to all be different so I wrapped different amounts. To Twine wrap all you need is a ball of twine and some glue and water mixture(just thin out the glue so its the consistency of Mod Podge). Simply brush the glue mixture onto the bottle and wrap the twine around the bottle. I always leave about 2 inches extra at the start in case it slides around a bit, then at the end, I can cut it to the correct length after it is dry. After the first two times around the twine doesn't move very easily so its actually very quick. 

I am going to put them on my kitchen window sill.